• Our Location
  • 289 Shree Bhuvan, 4th khetwadi, Mumbai
  • working hours
  • MONDAY - SATURDAY : 10:00 Am - 6:00 Pm
get a quote

ASME B16.5 RTJ Flange

  • Home
  • ASME B16.5 RTJ Flange

Stainless Steel RTJ Flanges, Ring Type Joint Flange Manufacturers in India.


ASME B16.5 rtj flange is one special type of flanges. The B16.5 flanges range in nominal bore sizes from ¼ inches to 24 inches. R.C. Metal Corporation is a leading manufacturer of the Stainless Steel RTJ Flanges in various sizes, pressure ratings, classes and material grades as well. The material grade ranges for different applications types and the Ring Type Joint Flanges can come with different mechanical properties. The most used of the flanges are made from 304 austenitic stainless steels. It has 205MPa minimum yield strength and the Weld Neck ring type joint flanges made up of this material can operate up to 870 degrees Celsius temperature. The welded neck on the flanges allows for maximum connection surface.


ASME B16.5 RTJ Flange

ASME B16.5 RTJ Flange

The PN16 RTJ Flange is of a lower pressure rating where the pressure ratings can range from PN6 through PN64. There are also different classes such as class 150, 300, 400 and so on that governs the wall thickness and diameter. The RTJ Pipe Flanges is a special type in that it has two halves as rings. Each ring is welded to on end of two different pipes. Then the pipes are brought together and the two halves are welded together to make the connection. The Flange RTJ Class 5000 is a high wall thickness, high pressure flanges. It can be used in high temperature, high pressure applications such as hydraulic systems, pressure vessels, heat exchangers and boiler components.

RC Metal Corporation

Table of Contents

The RTJ Flange Class 600 is relatively lower class which can be used in low pressure applications such as water lines, sea water desalination systems, pollution control systems and so on. The Blind RTJ flanges is particularly unique in that it closes the connection instead of extending the line. The blind flanges are useful in maintenance systems. The Raised Face rtj flange type is available with a raised face so that there is more surface for bolt holes and grip. This is to ensure that the connection is strong and tight enough. High class flanges such as 2500# RTJ Flanges are used with high tensions pipe lines. Please contact us for more information on the PN10 RTJ Flanges and the pricing.


RTJ Pipe Flange Analysis Specification


Specifications ASME B16.5 RTJ Flange
Standards ASME | BS | DIN | ANSI | GOST | EN Flanges
Sizes From 1/2 inch (i.e. 15 NB) upto 48 inch (i.e. 1200NB)
UNI/ DIN / EN Standard 6Bar, 10 Bar, 16Bar, 25 Bar, 40Bar
Pressure Classes Cl 150, Class 300, Cl. 400, 600, Class 900, Cl 1500 and 2500
Flanges Face Type FF, RF, LMF, SMF, RTJ, LJF.
JIS Standards 5 K, 10K, 16K, 20 K, 30K, 40K, 63 K

Check Weld Neck ring type joint flange, Flange RTJ Class 5000, RTJ Pipe Flange Pressure Ratings.


Temperature Rating of Stainless Steel RTJ Flanges


Temp. (F°) CL. 300 CL. 150 CL. 600 CL. 400 CL. 1500 CL. 900 CL. 2500
-20 to 100 740 285 1480 985 3705 2220 6170
200 680 260 1360 905 3395 2035 5655
300 655 230 1310 870 3270 1965 5450
400 635 200 1265 845 3170 1900 5280
500 605 170 1205 805 3015 1810 5025
600 570 140 1135 755 2840 1705 4730
650 550 125 1100 730 2745 1650 4575
700 530 110 1060 710 2655 1590 4425
750 505 95 1015 675 2535 1520 4230
800 410 80 825 550 2055 1235 3430
850 320 65 640 425 1595 955 2655
900 230 50 460 305 1150 690 1915
950 135 35 275 185 685 410 1145
1000 85 20 170 115 430 255 715

Purchase RTJ Flange Class 600, RTJ Flange Material at Cheap Cost, Huge Invetory of RTJ End Flange.


Most Selling Types of ANSI B16.5 Ring Type Joint Flange


2 in. Weldneck 1500# Carbon Steel Ring Type Joint Flanges

2 in. Weldneck 1500# Carbon Steel Ring Type Joint Flanges

10 in. Weldneck 300# Schedule 80 Carbon Steel Ring Type Joint Flanges

10 in. Weldneck 300# Schedule 80 Carbon Steel Ring Type Joint Flanges

3 in. 900# Blind and Ring Type Joint 316L Stainless Steel Flanges

3 in. 900# Blind and Ring Type Joint 316L Stainless Steel Flanges

6 in. Weldneck 300# Extra Heavy Carbon Steel Ring Type Joint Flanges

6 in. Weldneck 300# Extra Heavy Carbon Steel Ring Type Joint Flanges

10 in. Slip-On 600# Carbon Steel Ring Type Joint Flanges

10 in. Slip-On 600# Carbon Steel Ring Type Joint Flanges

2 in. Weldneck 600# Schedule 160 Carbon Steel Ring Type Joint Flanges

2 in. Weldneck 600# Schedule 160 Carbon Steel Ring Type Joint Flanges

3 in. 900# Slip On Ring Type Joint 316L Stainless Steel Flanges

3 in. 900# Slip On Ring Type Joint 316L Stainless Steel Flanges

4 in. Weldneck 900# Schedule 160 Carbon Steel Ring Type Joint Flanges

4 in. Weldneck 900# Schedule 160 Carbon Steel Ring Type Joint Flanges

Check Carbon Steel RTJ Flange Dimensions in MM


Check Carbon Steel RTJ Flange Dimensions in MM

Dimension Table of MSS SP-44 150# RTJ Flange


  Pipe Sizes Widthrong>of Ring Pitch Dia. of Ring and Groove Height Of Ring   Widthroove Widthlat on Octagonal Rings Dia. of RF for Ring Joint or Lapped Depth of Groove Ring No. Approx. Distande B/W Flanges of Ring Joints When Ring is Compressed
Octagonal Oval
A P H B F C K(Min) E(L*)
1 8.0 47.6 12.7 14.3 8.7 5.2 63.5 6.4 R15 4.1
1 1/4 8.0 57.2 12.7 14.3 8.7 5.2 73.2 6.4 R17 4.1
1 1/2 8.0 65.1 12.7 14.3 8.7 5.2 82.6 6.4 R19 4.1
2 8.0 82.6 12.7 14.3 8.7 5.2 101.6 6.4 R22 4.1
2 1/2 8.0 101.6 12.7 14.3 8.7 5.2 120.7 6.4 R25 4.1
3 8.0 114.3 12.7 14.3 8.7 5.2 133.4 6.4 R29 4.1
3 1/2 8.0 131.8 12.7 14.3 8.7 5.2 153.9 6.4 R33 4.1
4 8.0 149.2 12.7 14.3 8.7 5.2 171.5 6.4 R36 4.1
5 8.0 171.5 12.7 14.3 8.7 5.2 193.5 6.4 R40 4.1
6 8.0 193.7 12.7 14.3 8.7 5.2 218.9 6.4 R43 4.1
8 8.0 247.7 12.7 14.3 8.7 5.2 273.1 6.4 R48 4.1
10 8.0 304.8 12.7 14.3 8.7 5.2 330.2 6.4 R52 4.1
12 8.0 381.0 12.7 14.3 8.7 5.2 406.4 6.4 R56 4.1
14 8.0 396.9 12.7 14.3 8.7 5.2 425.5 6.4 R59 3.0
16 8.0 454.0 12.7 14.3 8.7 5.2 482.6 6.4 R64 3.0
18 8.0 517.5 12.7 14.3 8.7 5.2 546.1 6.4 R68 3.0
20 8.0 558.8 12.7 14.3 8.7 5.2 596.9 6.4 R72 3.0
24 8.0 673.1 12.7 14.3 8.7 5.2 711.2 6.4 R76 3.0
Cut to Size of Raised Face rtj flange, View RTJ Flange Class 1500, Flat face RTJ flange Dimensions.

DIN86029 300 lb RTJ Flange Dimensional Chart


  NPS Ring and Groove Pitch Diameter   Widthrong>of Ring Height Of Ring Depth of Groove Widthlat on Octagonal Rings RF for Ring Joint or Lapped Diameter   Widthroove Ring No. Appro. Distande Between Flanges of Ring Joints When Ring is Compressed
Octagonal   Oval
P A H B E(L*) C K(Min) F Class 400 Class 300 Class 600
1/2 34.1 6.4 9.5 11.1 5.6 4.3 50.8 7.1 R11 – 3.0 3.0
3/4 42.9 8.0 12.7 14.3 6.4 5.2 63.5 8.7 R13 – 4.1 4.1
1 50.8 8.0 12.7 14.3 6.4 5.2 69.9 8.7 R16 – 4.1 4.1
1 1/4 60.3 8.0 12.7 14.3 6.4 5.2 79.5 8.7 R18 – 4.1 4.1
1 1/2 68.3 8.0 12.7 14.3 6.4 5.2 90.4 8.7 R20 – 4.1 4.1
2 82.6 11.1 15.9 17.5 7.9 7.7 108.0 11.9 R23 – 5.6 4.8
2 1/2 101.6 11.1 15.9 17.5 7.9 7.7 127.0 11.9 R26 – 5.6 4.8
3 123.8 11.1 15.9 17.5 7.9 7.7 146.1 11.9 R31 – 5.6 4.8
3 1/2 131.8 11.1 15.9 17.5 7.9 7.7 158.8 11.9 R34 – 5.6 4.8
4 149.2 11.1 15.9 17.5 7.9 7.7 174.8 11.9 R37 5.6 5.6 4.8
5 181.0 11.1 15.9 17.5 7.9 7.7 209.6 11.9 R41 5.6 5.6 4.8
6 211.2 11.1 15.9 17.5 7.9 7.7 241.3 11.9 R45 5.6 5.6 4.8
8 269.9 11.1 15.9 17.5 7.9 7.7 301.8 11.9 R49 5.6 5.6 4.8
10 323.9 11.1 15.9 17.5 7.9 7.7 355.6 11.9 R53 5.6 5.6 4.8
12 381.0 11.1 15.9 17.5 7.9 7.7 412.8 11.9 R57 5.6 5.6 4.8
14 419.1 11.1 15.9 17.5 7.9 7.7 457.2 11.9 R61 5.6 5.6 4.8
16 469.9 11.1 15.9 17.5 7.9 7.7 508.0 11.9 R65 5.6 5.6 4.8
18 533.4 11.1 15.9 17.5 7.9 7.7 574.8 11.9 R69 5.6 5.6 4.8
20 584.2 12.7 17.5 19.1 9.5 8.7 635.0 13.5 R73 5.6 5.6 4.8
24 692.2 15.9 20.7 22.2 11.1 10.5 749.3 16.7 R77 6.4 6.4 5.6

Provide Blind RTJ flange in classes like 2500# RTJ Flange, WNRF RTJ flange Suppliers in India.

900 Class RTJ Flange Dimensions


  NPS Pitch Dia. of Ring and Groove Widthrong>of Ring Height Of Ring   Widthroove   Widthlat on Octagonal Rings   Depth of Groove Dia. of RF for Ring Joint or Lapped Approx Distande Between Flanges of Ring Joints When Ring is Compressed   Ring No.
Octagonal Oval
P A H B F C E(L*) K(Min)
3 123.8 11.1 15.9 17.5 11.9 7.7 7.9 155.4 4.1 R31
4 149.2 11.1 15.9 17.5 11.9 7.7 7.9 180.8 4.1 R37
5 181.0 11.1 15.9 17.5 11.9 7.7 7.9 215.9 4.1 R41
6 211.2 11.1 15.9 17.5 11.9 7.7 7.9 241.3 4.1 R45
8 269.9 11.1 15.9 17.5 11.9 7.7 7.9 307.8 4.1 R49
10 323.9 11.1 15.9 17.5 11.9 7.7 7.9 362.0 4.1 R53
12 381.0 11.1 15.9 17.5 11.9 7.7 7.9 419.1 4.1 R57
14 419.1 15.9 20.7 22.2 16.7 10.5 11.1 466.9 4.1 R62
16 469.9 15.9 20.7 22.2 16.7 10.5 11.1 523.7 4.1 R66
18 533.4 19.1 23.8 25.4 19.8 11.1 12.7 593.9 4.8 R70
20 584.2 19.1 23.8 25.4 19.8 12.3 12.7 647.7 4.8 R74
24 692.2 25.4 31.8 33.4 27.0 17.3 15.9 771.7 5.6 R78

Dimensions of ASME B16.5 Cl 1500 RTJ Flange


  NPS Widthrong>of Ring Pitch Dia. of Ring and Groove Height Of Ring   Widthroove   Widthlat on Octagonal Rings RF for Ring Joint or Lapped Diameter Depth of Groove Ring Number Approx Distande B/W Flanges of Ring Joints When Ring is Compressed
Octagonal Oval
A P H B F C K(Min) E(L*)
1/2 8.0 39.7 12.7 14.3 8.7 5.2 60.5 6.4 R12 4.1
3/4 8.0 44.5 12.7 14.3 8.7 5.2 66.8 6.4 R14 4.1
1 8.0 50.8 12.7 14.3 8.7 5.2 71.4 6.4 R16 4.1
1 1/4 8.0 60.3 12.7 14.3 8.7 5.2 81.0 6.4 R18 4.1
1 1/2 8.0 68.3 12.7 14.3 8.7 5.2 92.2 6.4 R20 4.1
2 11.1 95.3 15.9 17.5 11.9 7.7 124.0 7.9 R24 3.0
2 1/2 11.1 108.0 15.9 17.5 11.9 7.7 136.7 7.9 R27 3.0
3 11.1 136.5 15.9 17.5 11.9 7.7 168.4 7.9 R35 3.0
4 11.1 161.9 15.9 17.5 11.9 7.7 193.8 7.9 R39 3.0
5 11.1 193.7 15.9 17.5 11.9 7.7 228.6 7.9 R44 3.0
6 12.7 211.2 17.5 19.1 13.5 8.7 247.7 9.5 R46 3.0
8 15.9 269.9 20.7 22.2 16.7 10.5 317.5 11.1 R50 4.1
10 15.9 323.9 20.7 22.2 16.7 10.5 371.6 11.1 R54 4.1
12 22.2 381.0 27.0 28.6 23.0 14.8 438.2 14.3 R58 4.8
14 25.4 419.1 31.8 33.4 27.0 17.3 489.0 15.9 R64 5.6
16 28.6 469.9 34.9 36.5 30.2 19.8 546.1 17.5 R67 7.9
18 28.6 533.4 34.9 36.5 30.2 19.8 612.9 17.5 R71 7.9
20 31.8 584.2 38.1 39.7 33.4 22.3 673.1 17.5 R75 9.7
24 34.9 692.2 41.3 44.5 36.5 24.8 793.8 20.6 R79 11.2

2500# RTJ Flange Dimensions Chart


  NPS Ring and Groove Pitch Dia. Widthrong>of Ring Height Of Ring Widthlat on Octagonal Rings   Widthroove RFfor Ring Joint or Lapped Diameter Depth of Groove   Ring No. Approximate Distande Between Flanges of Ring Joints When Ring is Compressed
Octagonal Oval
P A H B C F K(Min) E(L*)
1/2 42.9 8.0 12.7 14.3 5.2 8.7 65.0 6.4 R13 4.1
3/4 50.8 8.0 12.7 14.3 5.2 8.7 73.2 6.4 R16 4.1
1 60.3 8.0 12.7 14.3 5.2 8.7 82.6 6.4 R18 4.1
1 1/4 72.2 11.1 15.9 17.5 7.7 11.9 101.6 7.9 R21 3.0
1 1/2 82.6 11.1 15.9 17.5 7.7 11.9 114.3 7.9 R23 3.0
2 101.6 11.1 15.9 17.5 7.7 11.9 133.4 7.9 R26 3.0
2 1/2 111.1 12.7 17.5 19.1 8.7 13.5 149.4 9.5 R28 3.0
3 127.0 12.7 17.5 19.1 8.7 13.5 168.4 9.5 R32 3.0
4 157.2 15.9 20.7 22.2 10.5 16.7 203.2 11.1 R38 4.1
5 190.5 19.1 23.8 25.4 12.3 19.8 241.3 12.7 R42 4.1
6 228.6 19.1 23.8 25.4 12.3 19.8 279.4 12.7 R47 4.1
8 279.4 22.2 27.0 28.6 14.8 23.0 339.9 14.3 R51 4.8
10 342.9 28.6 34.9 36.5 19.8 30.2 425.5 17.5 R55 6.4
12 406.4 31.8 38.1 39.7 22.3 33.4 495.3 17.5 R60 7.9