View Schedule 40 Cap, ASTM A234 WPB End Cap Dimensions.
ASTM A234 WPB Cap is one of the weldable, pressure capable grade B fittings in the ASTM A234 specification. This specification specifies fittings of high pressure applications. R.C. Metal Corporation is a leading manufacturer and supplier of the ASTM A234 WPB End Cap and other fittings for use in various industrial applications. The caps are different than all other fittings in that they close a pipeline as opposed to other fittings which extend the pipeline. The SA234 WPB Pipe Caps are produced as seamless, welded and fabricated. The seamless caps are mostly used with seamless pipe lines. The A234 Gr WPB Buttweld Cap is strong.
ASTM A234 WPB Cap
It can be used in petrochemical, petroleum refinery, heat exchanger and in boiler applications. The material is a carbon steel and it has high toughness. The Carbon Steel Pipe Cap A234 WPB has 240MPa minimum yield strength and 585MPa minimum tensile strength. This enables the pipes to be used with high stress applications. The A234 WPB pipe caps also have high toughness which means they have high wear and tear resistance. Carbon steels are usually high wear and tear resistance.
The ASME SA234 WPB cap can be used with carbon steel pipes and dimensions range according to the pipe line diameter. The standards are ASME B16.5 and B16.28. The fittings come in ½ inches to 24 inches nominal bore sizes under these standards. The End Cap WPB Carbon Steel has carbon, manganese, sulfur, nickel, chromium, silicon and vanadium in the composition. The application of the Pipe Cap A234 WPB can also be seen in the domestic, commercial and industrial applications. Depending on the application requirements, the mechanical and physical properties of the fittings vary. Please feel free to contact us for more information on the Cap ASTM A234 WPB and the prices.
Specifications of Carbon Steel Pipe Cap A234 WPB
ASTM A234/ ASME SA234
Seamless Butt-Weld Fitting: From 1/2″ - 10″
Welded ButtWeld Fitting: From 1/2″ - 48″