Manufacturers of Inconel 625 Forged Fittings, Alloy 625 pipe fittings in India.
Inconel 625 Pipe Fittings are used mostly in sea water and marine applications for their excellent strength against chloride rich environment. R.C. Metal Corporation is a leading manufacturer and supplier of the Alloy 625 pipe fittings in various types, dimensions and shapes. The fittings can withstand extreme heat. They have good ductility, stability, good surface finish, cryogenic strength and corrosion resistance. The Inconel Alloy 625 Welded Pipe Fittings as well as other type such as the seamless and fabricated fittings also have resistance to abrasion. Their good magnetic properties allow them to be used in the power generation industries as well. The material consists of carbon, manganese, silicon, sulfur, iron and 58% nickel with 20% chromium. This combination provides the Inconel 625 Elbows and other fittings with excellent mechanical properties.
Inconel 625 Pipe Fittings
The minimum yield strength of the fittings is 517MPa and the minimum tensile strength is 930MPa. The UNS N06625 Concentric Reducer is one type of the reducer which is used to reduce the pipe diameter at the connection. The other type is the eccentric reducer. The difference comes from the alignment to the axis of flow by the concentric reducer and the alignment to one side of the pipe by the DIN 2.4856 Inconel Alloy Eccentric Reducer. The material is also high temperature resistant with 1350 degrees Celsius melting point. The sizes vary according to standards and manufacturing types. There are welded, seamless, fabricated and Inconel 625 Forged Fittings.
The seamless fittings vary from ½ inches to 10 inches of nominal bore size where the welded fittings go up to 48 inches. There are different wall thicknesses ranging from 2mm to 40mm and the wall thicknesses correspond to the schedules and pressure classes. The ASTM B366 UNS N06625 Socket weld Fittings have schedules sch5 through XXS. The different types such as socket weld and welded neck fittings are used under different application requirements. Please feel free to contact us for the different Inconel 625 Seamless Pipe Fittings and the pricing.
View Available Size of Inconel 625 Elbows, Purchase Inconel Alloy 625 Welded Pipe Fittings, Inconel 625 fittings at Lowest Possible Price.
Specification of Inconel 625 Pipe Fittings
Size Ranges
½ to 24″ NB
Fitting Thickness
SCH 5, SCH XXS, SCH 80S, SCH10, SCH XS, SCH 80, SCH 160, SCH 40 available with NACE MR 01-75
Specifications
ASME SB366 | ASTM B366
Size Range
Welded Butt-weld Fitting: From 1/2″ - 48″
Seamless ButtWeld Fitting: From 1/2″ - 10″
Get ASTM B366 UNS N06625 Socket weld Fittings Chemical Properties, Also Check DIN 2.4856 Inconel Alloy Eccentric Reducer, 625 Inconel Short Stub End Physical Behaviour.
Physical Strength of DIN 2.4856 Inconel Alloy Eccentric Reducer
Density
lb/cu in
0.305
gram/cc
8.44
Melting Range
°F
2350
°C
1290
Specific Heat
Btu/lb°F (J/kg°C)
0°F (-18°C)
0.096(402)
70°F (21°)
0.098(410)
200°F (93°C)
0.102(427)
400°F (204°C)
0.109(456)
600°F (316°C)
0.115(481)
800°F (427°C)
0.122(511)
1000°F (538°C)
0.128(536)
1200°F (649°C)
0.135(565)
1400°F (760°C)
0.141(590)
1600°F (871°C)
0.148(620)
1800°F (982°C)
0.154(645)
2000°F (1093°C)
0.160(670)
Permeability
at 200 Oersted (15.9 kA/m)
1.0006
Curie Temperature
°F
<-320
°C
-196
Equivalent Grades of ASTM B366 Inconel 625 Equal Tee
STANDARD
JIS
WERKSTOFF NR.
EN
BS
UNS
GOST
AFNOR
Inconel Alloy 625
NCF 625
2.4856
NC22DNB4M
NA 21
N06625
ХН75МБТЮ
NC22DNB4M
Inconel Alloy 625 Welded Pipe Fittings Chemical Element
Product
Si
C
S
Mn
Cu
Ni
Fe
Cr
Inconel 625
0.50 maximum
0.10 maximum
0.015maximum
0.50 maximum
–
58.0 minimum
5.0 maximum
20.0 – 23.0
Refer Mechanical Properties Table of Alloy 625 Buttweld 90 deg. Elbow, Suppliers of ASTM B366 Grade Wpncmc Fittings, ASTM B366 UNS N06625 Fittings in India.